moyno grinders

The Moyno line of grinders meets the broad needs of any industry requiring solids reduction or waste conditioning. The diverse line of grinders ensures that Moyno has the right equipment to meet your challenge. Designed for industries requiring solids reduction or waste conditioning. 
Home / Products / Grinders / Moyno
moyno

EZ Tr Muncher

The most recent expansion to the EZstrip™ family includes a series of grinders that provide a competitive solution for solids grinding and sludge conditioning. All EZstrip™ TR Munchers® feature a quick-release access port, enabling maintenance of the cutter assembly without the need to remove the equipment, thus minimizing maintenance time.

Available in the CT201 & CT 203/205.

APPLICATIONS (ct203/205)

  • Tanker reception
  • Pump protection
  • Fat/sludge conditioning
  • Abrasive sludge maceration
  • Screenings in wastewater
  • Organic waste maceration

Benefits (ct203/205)

  • Mono ETOS cutters offer positive and effective solids maceration
  • Shafts operate at differential speeds to promote a tearing action on the solids
  • Pull back cutter stack allows removal without disturbing the pipeline
  • Cantilever shaft design eliminates the need for bottom bearings and seals, significantly reducing wearing components
  • Patented built-in trash trap with clean-out ports to catch any rejected material
  • Low cutter tip speeds, low power and low noise level
  • Each Muncher is supplied with a programmable logic controller (PLC) to protect the machine against damage and overloads

Benefits (ct201)

  • Quick release access port allows the cutter assembly to be maintained in-place without removing the equipment and therefore reduces maintenance time.
  • Rotational speed produces high torque, resulting in lower operating power at 1.5 or 2.2kW, which are available with energy efficient motors.
  • Lower cutter tip speeds dramatically reduce wear rates. Slow speeds also ensure low noise and vibration, and good abrasion resistance.
  • Off-loading requirements for ‘on-stand’ tankering are matched by the Munchers capacity.
  • Pull-back cutter stack allows removal without disturbing the pipeline.
moyno

Series A Muncher

Series A is the replacement of the discontinued Moyno Annihilator Grinder.

The Series A Muncher can be paired with other Moyno pumps to create an efficient system for macerating, screening, or pumping. Known for its dependable performance, the Series A effectively processes raw sewage, sludge, screenings, and industrial flows. Designed for both pipeline and channel installations, its low shaft speed of 85 rpm minimizes cutter wear—offering longer service life compared to high-speed alternatives.

Benefits (ct201)

  • Energy Efficient & Cost Saving: Replacing traditional screening systems with a Muncher significantly reduces power usage, manual handling, transport costs, and odors—while enabling fully automated operation in both existing and new submersible pump stations.

  • Effective Solids Reduction: Equipped with ETOS cutters, the Muncher delivers powerful and reliable grinding of solids.

  • Increased Capacity: Optional high-flow side rails boost system throughput by up to 40% and help prevent unprocessed solids from passing through.

  • Easy Retrofit Installation: Munchers can be quickly installed into existing concrete channels or mounted in a fabricated frame with guide rails—making upgrades simple and efficient.

  • Built-In Protection: Each unit includes a programmable logic controller (PLC) to safeguard against damage and overload conditions.

  • ATEX Compliant: Units can be configured to meet ATEX Directive 94/9/EC for use in potentially explosive environments.

APPLICATIONS

  • Macerate raw sewage
  • Sludge
  • Screenings
  • Industrial process flows